Shop

The Javac NT-3 is equipped with 6 filling hoses that are controlled by 1 controller, which means that a lot of time is saved, a time saving that increases to 70%.
This nitrogen generator has its main application for truck tires, but it is evident that tires of passenger cars and motorcycles can also be filled.
The purity of the nitrogen is as good as total at 99.5%.
The microprocessor is fully programmable provided it has a microprocessor.
This value can be consulted on the LED screen.
This machine must be equipped with an external galvanized tank of 500 or 1000 liters to store the nitrogen.
A larger vessel allows you to fill multiple tires without having to wait for the generator.
The splitting of the air mass into oxygen and nitrogen is achieved with a sophisticated CMS filter on 2 levels, while the first filter takes care of the splitting of the air, the second filter provides an optimal purity of the nitrogen through. an active carbon filter.
The incoming air is pre-filtered on water and oil particles.
The filling of the tires is controlled fully automatically by means of a PLC, and can be followed on the LED display.
Among other things, the display has a memory to store the last filling data.
Both filters should be replaced every other year, this is also reported in good time on the LED screen.
The Machine operates completely safely.
As soon as the nitrogen generation is stopped, this generator switches off automatically.
This machine is also equipped with an alarm system that is activated as soon as an irregularity is detected.
Finally, this unit can be connected to a computer system to store the filling values ​​of the tires.
You have the option to have the filling run automatically.
With automatic zero drift setting. The last values ​​are automatically maintained for filling.
When the tire is filled, you get a visual and audio signal. This generator also diagonalises itself.
The execution of the controls is resistant to brutal or injudicious use.
The unit is standard equipped with 4 filling hoses with a length of 8 meters.
While you can extend this to 6 hoses for simultaneous feeding.
There is a more extensive diagnostics and problem registration.
This machine is also equipped with an output to measure the purity of the nitrogen.
There is also a safety valve that opens in case of overpressure.