+32(0)3.666.44.17 +32(0)472.70.08.15 (after office hours)


  • PFC-technologie
  • Optimal performance on ultra-thin surfaces without distortion
  • Selection of Spot/Pulse Time Function
  • Downslope, upslope, gas upstream and downstream flows; Pulse frequency adjustable
  • Protection against overvoltage, undervoltage, overcurrent and overheating
  • Generator Compatible
  • TIG / MMA mode
  • Light and handy
  • Operates on 230 Volt 50 Hz with fuse 16 AMP
  • Supplied with SR-17/4 professional welding torch 4 meters + ground cable
  • Everything nicely packed in PVC impact-resistant storage case
Prijs op aanvraag (0.00 incl. BTW)
Meer informatie

Availability and delivery date contact us for more information.

The Javac AST 200 PFC Tig inverter with a capacity of 200 AMP at 230 volts is equipped with Siemens semiconductors.
With a setting time of 50% at 40 C° in the TIG range, this machine can be used 100% for welding jobs up to 6 mm in stainless steel, which is more than sufficient for the majority of welding jobs in stainless steel.
Thanks to the PFC (POWER FACTOR CONTROL) module, a 16 AMP fuse is sufficient for this machine even at full load.
This machine can be used with long power cables, even on non-stabilized generators this machine will function flawlessly.
This machine, weighing only 9 kg, is very easy to control by means of the adjustment mechanism. its digital LED panel.
Setting all the necessary welding parameters is child’s play and requires no training, so that this machine can be used immediately.


Main voltage 1-230V ± 10 %, 50/60 Hz 1-230V ± 10 %, 50/60 Hz
Ability 6.3 kW 4.6 kW
Effective flow 32 A 21 A
Insurance 16 A 15 A
Setup time (40° 10 min) 50% 200 A
60% 130A
100% 100A
30% 200 A
60% 145A
100% 135A
Idle voltage 66 V 66 V
Weld range 5 bis 200 A 5 bis 200 A
Insulation class H H
Size (LxWxH) 465x146x268 mm 465x146x268 mm
Weight 9 KG 9 KG
Protection Factor IP 23 IP 23

There are currently no reviews.