MAGSTAR 200 DP

This device has two different levels of amperage as a power source.
On the one hand, the constant base current, which maintains the welding arc, with the pulse current over it.
The built-in processor precipitates the drops of additive material, always 1 drop per pulse.
A second choice setting you have with the double pulse setting.
The device will then pulse feed the welding wire.
The major advantage of pulsed welding is that less heat is introduced, minimizing distortion of the material.
Also you will obtain an optimal burn-in, this manifests itself in a visually perfect weld with good adhesion, you will also notice that the spatter behavior is nil.
The welding itself becomes a lot easier especially on thin material when welding in up or down position.
Especially for welding aluminum, our DP-200 Magster is highly appropriate.
Welding on Alu plate even below 1 mm, with welding wire of 1.2 is perfectly possible, also for longer welds.
Many times this machine is an alternative to Tig welding with an ACDC, mainly because you will be able to weld 4 x faster on average, and especially for less qualified welders.
To achieve even better results, this device is equipped with a full synergy setting.
It is sufficient to enter the parameters in 5 available languages including Dutch.
The software was written by the Vienna University of Technology, a leader in welding technology applications.
In addition to the synergic setting, the user has the ability to set his own parameters.
This program can then be saved for a similar next welding task.
On videos you can see how the single and double pulse works, and what the result achieved is.
Unlike the market price, this extremely full-fledged double pulse welding machine is very affordable.