ALU-compressed air system

Leakproof compressed air line
No glue, soldering, or screws needed
Does not sag after time like PVC pipes
Visually very tight and streamlined compressed air line
Simple and super fast click system
No rust or dirt due to the use of smooth ALU tubes
Diameters from 20 to 160 mm
For compressed air, water, hydraulics, vacuum, etc. (with various color codes)
For the self-erecting machine or our assembly service
Test pressure for hydraulic lines 400 bar
Full ALU version also the appendages and ball valves
Extremely lightweight construction ideal for cable cars and fast assembly

Klik op de afbeelding om de catalogus te downloaden

 

How to save 30% or more on your compressed air costs?

Your attention goes mainly to the operation of your compressor and the compressed air applications, usually the compressed air line is not in sight, but here are important payback effects to create! We can mainly reduce this to these 3 errors:

ERROR 1 Poor pipe diameter and choice of pipe!

just about every compressed air system suffers from these 3 defects: flow losses, pressure drops and leakage losses. This is usually compensated by increasing the working pressure of the compressor 2 bar or more, with the result that your electricity and maintenance costs of your compressor are high, here are our 3 instructions how to avoid this cost price:

A: correct diameter of your compressed air network, depending on the desired working pressure, the flow rate, and also take into account the fact that you can expand in the future, so that you do not have to start from scratch, ask for an offer without obligation, we come to view the situation on site, and we compile a compressed air piping plan that meets your requirements 100%

B: let your choice fall on the right material avoids steel showers (rust) PVC (leaks due to poor gluing, aging phenomena, sagging) or other inadequate pipes, often we even come across installations with compressed air hoses, fastened with colson straps. Provide the right pipe material, keep in mind that the inner wall of the pipe is smooth, couplings are used that do not cause narrowing, which leads to turbulence and consequently expensive pressure drops, make use of condensate-free branches, even if an air dryer is provided. Finally, make sure you know the structure of your pipeline network, go for a straight net or opt for the ring pipeline. Basically, the working pressure of compressed air is set at 6 Bar, suppose that you have to adjust your compressor to 9 or 10 bar working pressure due to an ill-considered compressed air line, because the desired pressure does not reach your machines, you can do this up to 30% or even more costs of your energetic ability, make the calculation. By choosing EQOFLUID, you have a very high payback time

ERROR 2 Do not replace Talm and replace your existing and expensive compressed air line z.s.m.!

Many workshops and factories have been in operation for 20-30 years or more, and the company’s own growth is constantly expanding, including in the compressed air requirement. Have you ever considered, the state of your current system pipes and what those pipes look like inside: corrosion, rust, differences in diameter, consequence: turbulence, pressure drops and compressed air leaks. Result: you burn your capital at useless costs.

ERROR 3 Compressed air line in galvanized tube!

A compressed air network in iron pipes is a practice of 30 years ago. Even for water pipes, this is no longer used, due to rust formation, as with compressed air. These tubes also worked with a threaded connection to guarantee leakage. Even with the new press systems, this is not the most ideal choice, because it is conceived for water and oil pipes, but compressed air behaves completely differently and has specific requirements. There are also no links or branches in the trade that can serve for an adaptation to compressed air. How important and expensive compressed air leaks can be, here an example of the current electricity tariffs (2018) costs a leak of 1 mm, and usually the compressor stand-by 24/24 u 491 euros per year, suppose you 10 of this miniscule almost inaudible leaks, they are already far above the investment of a large compressed air pipeline … To our surprise there are also still offered plastic pipes, these start after a while to sag, adhesions come loose, or are not following rules of art glued, and are mechanically quite fragile, as you can see there is only 1 certainty and that is the eqofluid ALU-system, light in weight, mechanically non-deformable, easily expandable, 100% leak proof, and if desired can be placed, or optionally placed by our experienced experts

Reviews

There are no reviews yet.

Be the first to review “ALU-compressed air system”